CodeLock CL5000 electronic Specifikace stáhnout pdf (Strana 21)

41mm (1

5

/8”)

Depth 38mm

(1

1

/

2

”) to top

of handle

1 Cabinet lock

2 Gasket

3 Upperfixingboltsx3(1spare)

4 Cam spindles x 4

5 Cams x 2

6 Cam fixing bolt

1

2

3

4

5

6

Cabinet Lock CL1200

Technical Specifications

Power 2 x 1.5v AAA cells

Operations 50,000 openings

Low battery The lock will signal low battery

to the user via the red LED

ashing. The lock will open

100 more times after this signal

is initiated. The non-volatile

memory retains settings when

batteries are changed.

Battery failure override

The Cabinet Locks have been designed so an

external PP3 battery can be placed against the

external contacts and using Master Code to

gain entry.

External dimensions

Length 141mm (5

3

/8”) x width 41mm (1

5

/8”)

x depth 38mm (1

1

/2”) to top of handle.

Material Zinc Alloy

Cam xing point 8mm (

5

/16”) square

Door thickness The CL1200 is supplied with 4

spindles to suit door between

6mm (¼”) or less up to 25mm

(1”) or less.

Buttons Individual stainless steel

buttons. Audible button press.

Finish Silver Grey

Auto-unlock feature: The lock can be

programmed via the Master Code to auto open

after a preset time, 2, 4, 6, 8, 12 hours

(locker mode only).

IP rating IP54 (when tted with

supplied gasket)

For internal use

CODES

Programming Information

The Cabinet Lock has four code levels available:

i) Master Code

ii) Sub-Master Code

iii) User Code

iv) Technician Code

The Cabinet Lock is supplied with two factory

set codes:

Master Code: 11 33 55 77

User Code: 22 44

• When tted immediately change the Master

Code and User Code.

• All Master Codes and Sub-Master Codes are 8

digits long – 100,000,000 code permutations.

• All User Codes are 4 digits long – 10,000

possible code permutations.

• The lock ‘open’ time is set at 4 seconds.

FUNCTIONS

Before programming select the most appropriate

function for the application.

A) Repeat code mode

Important Note: This is the default function and

is already pre-programmed in new locks. This is

the most common function and is used where the

same code will be repeatedly used.

B) Single use code mode (locker mode)

The User enters a single use code which will lock

and then open the lock once only and then be

erased. This function is used for short term, multi

occupancy applications e.g. a locker in leisure

centre.

The lock will now remain open until the next single

use code is entered into the lock.

OPERATING INSTRUCTIONS

Note: The Cabinet Lock has a 10 button

keypad and a

CODELOCKS.COM button. This is

used when programming and is found behind

the handle.

The same code cannot be programmed into more

than one level.

The lock has the following code levels:

Master Code can:

Open the lock

Change the Master Code

Set / Change / Delete the Sub-Master, User and

Technician Code

Select between repeated use and single use codes

Restrict the lock time

Sub-Master Code can:

Open the lock

Change the Sub-Master

Set / Change / Delete the User Code

User Code can:

Open the lock

Change the User Code

Technician Code can:

Open the lock without erasing User Code

CL1200

Colour Options Available

Contact Codelocks

36

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 34 35

Komentáře k této Příručce

Žádné komentáře