
Front depth off door: 58mm (2
1
/3”)
Codelocks CL400 Range
Technical Specifications
Door thickness 35mm - 65mm (1
3
/8”-2
1
/2”)
Spindle type 2 part 8mm (
5
/16”) spring loaded
spindle
Body material Zinc alloy
Non handed Lock will t doors hung on the
left or right
Mortice Latch (CL410 & CL415)
Medium duty, stainless steel latchbolt head with
“anti” shim deadlocking plunger, 8mm (
5
/16”)
follower.
60mm (2
3
/8”) backset, requires 25mm (1”) hole,
82mm (3
1
/4”) deep.
70mm (2
3
/4”) backset, requires 25mm (1”) hole,
92mm (3
5
/16”) deep.
Mortice Lock (CL420 & CL425)
Euro prole mortice sash lock with deadbolt
and latchbolt. Complete with double cylinder to
control deadbolt and to retract latchbolt. With
the deadbolt locked it denies access to a code
user. The key can be used to open doors for
management functions such as security and
cleaning. The split follower enables the inside
lever to retract the deadbolt and latch to prevent
accidental lock in when the deadbolt is thrown.
Supplied with double euro prole cylinders with
three keys. May be ordered keyed alike.
Code Free access option via keypad on models
CL405, CL415 & CL425.
Codes
8,191 non sequential codes available
Code storage
Single code
Code change method
Requires removal of lock from door
Finishes available
PVD (Physical Vapour Deposition) hardwearing low
maintenance nishes SS (stainless steel) and
PB (polished brass).
For internal and external use
Neoprene seals are included on both sides to
provide friction against the face of the door
and to prevent damage from over tightening
of the xing bolts. The outside lever handle
has a slipping clutch to prevent damage to
the lock if the handle is forced.
CL410 Mortice Latch
Outside lever handle will retract the latch after
a correct code is entered. The spring loaded
latchbolt will lock automatically when the door
is closed.
CL415 Mortice Latch
As CL410 with Code Free access option on
keypad. In Code Free mode the outside lever
will retract the latchbolt without using a code.
CL400 Front & backplates only
NOT ILLUSTRATED
For use with existing lock or latch.
CL405 Front & backplates only
NOT ILLUSTRATED
With Code Free access, for use with existing
lock or latch.
NB 1: For CL400 & CL405 existing lock
must have 22mm (
7
/8”) xing hole below
follower (spindle).
NB 2: See note page 65
CL420 Full Mortice Lock
with Safety Feature
Outside lever handle will retract the latch after
a correct code is entered. The spring loaded
latchbolt will lock automatically when the
door is closed. Key retracts latchbolt for entry
without using a code. Key controls deadbolt
position. When deadbolt is projected it denies
access by code. When deadbolt is projected
the safety feature allows the inside lever handle
to retract the deadbolt and the latchbolt,
preventing people being accidentally locked in.
CL425 Full Mortice Lock with Safety
Feature
As CL420 with Code Free access function
on the keypad. In Code Free mode the outside
lever will retract the latchbolt without using
a code.
Back to Back
NOT ILLUSTRATED The CL410 (Mortice Latch)
may be ordered with two keypad plates for
installation on both sides of the door to provide
coded access in both directions. Stainless
Steel nish only.
CL410
CL415
CL420
CL425
50
Komentáře k této Příručce